1. Wavy sideband:

It plays the role of traction and bearing materials on the belt conveyor.

2. Electric roller:

It is a power transmission component. The conveyor belt runs by the friction between it and the drum

The moving drum has a rubber surface, which can increase the adhesion between the drum and the conveyor belt.

3. Reversing drum and belt pressing wheel:

Used to change the running direction of the conveyor belt.

4. Idler set:

The idler group is used to support the conveyor belt and the materials on the belt to make it run stably, and the parallel idler group is used to support the conveyor belt and the materials on the belt; The buffer idler is installed at the material receiving place of the conveyor to protect the conveyor belt and prolong the service life of the conveyor belt; Convex arc idler group is used at the turning of wavy sideband; The stop roller group is used to prevent the belt from deviation.

5. Screw tensioning device:

(1) Make the conveyor belt have enough tension to ensure that there is no slip between the conveyor and the drum

(2) limit the sag of the conveyor belt on each support and make the conveyor operate normally.

6. Sweeper:

Its function is to clean the materials adhered to the conveyor belt. This series has two types: roll vibration sweeper and empty section sweeper.

7. Head frame, head funnel, head shield, guide chute, intermediate frame, tail frame, outrigger, drive frame, etc. play the role of support, dust prevention and material guide respectively in the conveyor. The connection between each part adopts bolt connection or welding.