Steep angle belt conveyor（Sidewall belt conveyor） is a continuous conveying equipment for bulk materials and uses a belt with corrugated and cleats. Therefore, it is especially suitable for steep angle transmission. The following is a detailed description of the installation process.
1, Basic retesting and acceptance. The basic retesting is the first and key step in the installation of the sidewall belt conveyor（Steep angle belt conveyor）. The basic retesting must be in strict accordance with the General Specifications for the Installation of Machinery and Equipment, and the actual level, elevation and center line should be measured.
2, Equipment components inventory. The components of the sidewall belt conveyor（Steep angle belt conveyor）are generally relatively messy, including the head frame, tail frame, and convex-arc section frame. Others such as the middle frame, trough-shaped roller frame, and idler roller have a large number of seal covers and need careful inventory. All components must be shipped in place after clearing.
3, Head and tail frame, convex arc section rack and middle rack installation and positioning, welding. First of all, during the installation, the center line should be found to determine the anchor point, and then a wire rack should be made at the head of the sidewall belt conveyor（Steep angle belt conveyor）. Using the wire fall, the convex arc and the concave wire segment at the upper and lower contact points should be used as a support. The steel wire is used to position the centerline of the belt. During the installation, the frame of the headstock, tailstock, and concave-convex section must be aligned with the centerline of the positioning. Deviations are allowed within the specifications.
4, Belt lifting and laying. The steep angle belt（sidewall conveyor belt） is an endless belt without joints. The weight of the belt must be clearly understood when installing. After the belt is lifted into place, the belt is put into the drum, and then the bolt fasteners are tightened and the belt is laid.
5, Belt operation, adjust the belt deviation. After the belt of the sidewall belt conveyor（Steep angle belt conveyor）is laid, the trough idler, the aligning idler, and the vertical roller are installed, and then the power supply operation belt is used to adjust the belt offset.
6, Belt machine attachment installation and bolt fastening. After the belt is well adjusted, it begins to install the sealing cover, the head cover, the fastening bolts, and the grinding brush oil.
7. The steep belt conveyor is in trial operation and acceptance is qualified. After the installation of the accessories is completed, re-inspect the bolts, welds, and missing items.
Expansion of small knowledge: sidewall belt conveyor（Steep angle belt conveyor） has the advantages of simple structure, convenient maintenance, small space occupation, saving investment (can replace belt conveyors, bucket elevators), convenient layout, etc., and is therefore used in coal, power, metallurgy, chemical, food and other industries. Widely promoted use.